nonblock_receive
Overview
After the application starts, perform the following 4 operations:
Initialize serial port 1
Create message queue
Register the callback function to receive the serial port data receiving status callback, and send the status message to task for processing in the callback;
Receive the message circularly. After receiving the message, obtain the pointer of the received data and the current block length from the driver, write the data back to serial port 1 according to the pointer and length, and release the data pointer.
Uart receives data in this way, does not block tasks, and can be used in the task of other module. Because the data pointer in the receiving buffer is directly processed, there is no need to copy it, which is more efficient.
Requirements
Note that the configuration of serial port 1 in the device table matches the board
Building and flashing
Sample location: examples/peripheral/uart/block_read_write
For operations such as compiling and burning, please refer to: [Quick Start] (../../../../../get_started/index. html # build function)